Supplies
- A piece of thin cardboard
 - One piece of scrap fabric for the body.
 - One piece of scrap fabric for the shell.
 - One scrap of batting.
 - Thread to match
 - Embroidery thread
 - Stuffing
 
- You start by cutting out templates from a piece of scrap cardboard.  You can just free-hand it or you can use this image as a template.
Here is what some of the template will look like.
 -  Double your scrap fabric for the turtle body.  Arrange the body template pieces (see picture below). Trace around them with a pencil or pen.   
 - Double the fabric for the shell. Trace around the shell template.
 - Trace the shell template onto your piece of batting.
 - Cut the shell fabric and the body fabric leaving a 1/4" seam allowance.
 - Cut the shell batting with no seam allowance.
 - At this point you should have 2 pieces of fabric for body, 2 pieces of fabric for shell, 1 piece of batting for the shell stuffing.
 - Assemble the Shell
 - Place fabric with right side facing each other. Using your sewing machine, sew around the shell with a 1/4" seam leaving a 2" opening.Stuff the batting into the shell and then hand-stitch the opening.
 - Stitch the shell in spiral or desired pattern to give it a quilted effect.
 - OPTIONAL: Using a backstitch with embroidery thread, make a design in the
 - Assemble the body
 - Sew around the body with a 1/4" seam leaving a 1" opening.
 - Stuff the body with stuffing and then hand stitch the opening.
 - Tack the shell to the body at four or 5 points around the turtle.
 - OPTIONAL: Embroider on a face or a smile.
 
Enjoy your stuffed turtle!!
![]()  | 
| Little Boy Clutching Beloved Little Turtle | 
Bringing joy to my little boy with a few left over scraps of fabric? That is a finer thing.
This post is a contribution to Finer Things Friday at Amy's The Finer Things in Life.
 



No comments:
Post a Comment